E 550 CR / E 550 PMCR
AUTOMATIC EDGEBANDER WITH CHAIN FEED, PRE-MILLING AND CORNER ROUNDING UNIT
Pre-milling with diamond cutterblocks
- N. 2 diamond cutterblocks at opposite rotation Ø 60 h 52 mm with 2 extractor hoods Ø 80 mm
- Feed guide with micrometric adjustment 0 ÷ 2.0 mm
- HF motors 2 x 0.75 kW 12000 rpm
- Max milling adjustment of 2 mm with panel heights 8–50 mm
Panel chain feeding system with rubber pads
- Feed speed 9 m/min
- Top bar with double row of rubber rollers adjustable in height
Corner rounding unit for finishing corners on straight and shaped panels
- Maximum processing quality thanks to accurate machining with a double linear support guide and a diamond cutterblocks
- Possibility of processing panels up to a height of 45 mm and edges up to 3 mm in thickness
- Unit controlled by PLC, with the possibility of choosing whether to process all corners or only front ones or only rear ones.
3 free spaces for finishing units
- Edge scraper: perfect edge finishing, even in backlight
- Glue scraper: removes glue residues, guaranteeing perfect panel finishing
- Buffing unit: which polishes, giving uniformity to the colour of the edge where it has been processed
“PURE” Glueing unit (opt.)
Revolutionary glueing technology
“At last, perfect glueing for every level of investment”
- The unit can work both with PUR or EVA glue, no cleaning is required even if machine does not work for a few days.
- Manual loading with hot melt adhesive granules.
- Quick and easy glue pot cleaning.
- An extra interchangeable glue pot is avaialble, upon request.
- Finishing, bonding and sealing of edge incomparable respect to traditional glueing systems.
Maximum finishing quality
- Chain feeding system
- Pre-milling (version E550PMCR)
- Corner rounding unit
- 3 free spaces for finishing units
- 9 m/min feed speed
- 50 mm panel height
- 3 mm edge coils
- 110 mm minimum panel length
Minimum space occupied
- length 3,7 m
Easy to use
- unit settings with a piece of edge
- easy and intuitive use of machine
Min./max. panel height: min. 8 – max. 50 mm
Min./max. edge thickness: 0.4 – 3 mm (coils) / 0.4 – 3 mm (strips)
Panel width: min. 95 mm
Panel length (Side being processed): min. 110 mm
Panel feed speed: 9 m/min
Pre-milling motors (each): 200 Hz – 12.000 rpm – 0.75 kW
Glue pot heating element: 1315 W – 6 cartridges
End trimming motor: 200 Hz – 12.000 rpm – 0.22 kW
Flush trimming motors (each): 200 Hz – 12.000 rpm – 0.37 kW
Cutterblocks with combined WIDIA disposable Knives (radius/bevelled):
ø 75 mm Z4 – hole ø 16 mm (r = 2–3 mm)
Total power installed: 5 kW approx.
Weight: 525 Kg approx.
about this product!