Maximum finishing quality
- Chain feeding system
- Pre-milling
- Gluing with polyurethane glue (Opt.)
- Automatic strips storage
- 3 free spaces for finishing units
High performance
- 11 m/min feed speed
- 60 mm panel height
- 3 mm edge coils
- 10 mm edge thickness in strips with automatic loading
Minimum space occupied
- Length 3,7 m K60 PM version
Easy to use
- Easy and intuitive use of machine
- Flush trimmers with multiprofile tool
(thin-R1-R2- strips)
MACHINE DETAILS K60 PM – Stockout
Pre-milling with diamond cutterblocks
- N. 2 diamond cutterblocks at opposite rotation ø 60 mm h 64 mm
- 2 extractor hoods Ø 80 mm
- Feed guide with micrometric adjustment 0 ÷ 2.0 mm
- HF motors 2 x 1,1kW 12000 rpm
Up to 10 mm wooden strips for panel height up to 60 mm (option available on request)
- Automatic strips loading
- Strip feeding by the pin roller
- Strips storage capacity up to 150 mm
- 1st motorized aluminum pressure roller – ø 110mm
Edge loading surface, with automatic feeding
- Strips storage up to 150 mm capacity
- Strip feeding with needle bearing roller
- 10 mm max strip height
Pressure rollers
- The system “reads” the thickness of the edge, impossible to mistake
- Adjustment with numerical indicators
- Independent pressure adjustment
- 1st motorized aluminum pressure roller – Ø 110 mm
Anti-adherence / release agent spraying unit (Opt.)
INSTANT PERFECT CLEANING
- Spray function controlled by PLC
- 2 sprayers (lower and upper) and liquid tank
Automatic glue drainage cycle. PUR (Opt.)
- Automatic glue drainage cycle.
Equipped with a drip tank of the glue discharged during the drain cycle
- Upon request an additional interchangeable glue pot is available.
- Processing both with PUR and EVA glue
- With PUR glue it is possible to stop machine (up to 4 days) without having to effect any cleaning procedure.
- Automatic cleaning of glue spreader roller
- Glue roller with integrated heating uniform and constant glue temperature
- Granule manual loading (glue pot 0,5 Kg)
Chain panel feeder with rubber pads
- Feed speed 11 m/min
- Top bar with double row of rubber rollers adjustable in height
Edge scraping unit (Opz.)
- Widia knives, (radius on request) Numerical indicators
- Blowers for removal of shavings.
- Dust extraction system complete with box to separate and collect scraping shavings.
Flush trimmers
- HF motors 200 Hz tiltable up to 25°
- Numerical indicators for adjustments
- Copying discs
- Combined Widia cutters bevelled/radius
Double blade trimming cut-off
PERFORMANCE AND VERSATILITY
- End trims front and rear excess edge
- Working cycle controlled by PLC
- HF motor 200 Hz
- Dust extraction included
Glueing unit 2 Kg
PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS
- Automatic Stand-by temperature
- Glue pot capacity 2 Kg.
- Teflon coated
- Nr. 7 cartridges 3050 W